Connect with us


Quicksilver promises to sharpen Blades



VETERAN coach Beston Chambeshi has promised to improve struggling Konkola Blades fortunes following his appointment until the end of the season.

Yesterday, Blades announced Chambeshi as their head coach, relegating Enos Silwimba to the position of assistant coach in a bid to save the team from doing into Division One.

Blades currently sit 15th on the log with 10 points after a run of two wins, four draws and five defeats.

Chambeshi said in an interview that there is a lot of work to do but he is equal to the task.

“I am happy to be here, as you know I am a coach who doesn’t fear any challenges, like I said earlier, we will work hard to ensure that we finish in a strong position,” Chambeshi said.

Chambeshi is one of the most travelled coaches in Zambia, he has previously drilled Nkana, Power Dynamos, Kansanshi Dynamos, Chambishi and Lumwana Radiants.

(Mwebantu, Thursday, 9th November, 2023)



  1. dating chat

    November 26, 2023 at 4:31 am

    Heyy there just wanted to gie you a quick heads up. The words in your post seeem to be
    running off the screen in Internet explorer. I’m not sure if this is a format issue
    or something to do with internet browser compatibility but I figured I’d post to
    let you know. The style and design look great though!
    Hope yoou get the problem solved soon. Many thanks

  2. Kazuko

    November 26, 2023 at 7:48 am

    You have made the point!

  3. Cecila

    November 26, 2023 at 9:14 am

    Este lugar es probablemente el escenario de un montón de videos de sexo nudista que ves en línea. Ya sabes, los que tienen un montón de gente en la playa y luego la cámara enfoca a una pareja que se pone juguetona y lo hace allí mismo. La gente a su alrededor debe saber lo que está pasando, pero les parece bien porque apuesto a que acaban de terminar de hacerlo, o se están preparando para una sesión sexy más adelante.

  4. Allison

    November 26, 2023 at 9:02 pm

    You said this fantastically!

  5. pg wallet

    November 27, 2023 at 3:32 am

    Actually when someone doesn’t be aware of then its up to other viewers that they will help, so
    here it happens.

  6. joker123

    November 27, 2023 at 4:45 am

    Hello it’s me, I am also visiting this web site regularly, this web
    page is truly pleasant and the people are in fact sharing
    good thoughts.

  7. pgslot

    November 27, 2023 at 6:58 am

    Right here is the right site for anyone who hopes to find out about this topic.

    You know a whole lot its almost hard to argue with you (not that I personally will need to…HaHa).
    You definitely put a fresh spin on a topic that’s been written about for a long time.

    Great stuff, just great!

  8. superslot

    November 27, 2023 at 7:56 am

    Hey there! This post could not be written any better! Reading through this post reminds me of my old room mate!

    He always kept chatting about this. I will forward this post to him.
    Fairly certain he will have a good read. Many thanks for sharing!

  9. Demi

    November 27, 2023 at 9:46 am

    Knowing the reasons can assist those looking to brighten their smiles proceed with care. If your favored foods have already left their mark, there are solutions for oral discolor elimination that can save the day. Brownish spots on teeth might be a very early signs and symptom of tooth cavities, which must be treated by a dental professional. Symptoms such as tooth pain, sensitivity, or foul breath may accompany them. Brownish spots on the teeth are not uncommon in celiac disease individuals. These marks may range in shade from yellowish-brown to black-brown, as well as the stains might take the form of marks, spots, dots, touches, or lines.
    Tooth Pastes & Dental Floss
    Samaddar advises chatting with your dental professional before you try any teeth bleaching item to guarantee it’s secure. Some items can cause tooth sensitivity or gum inflammation. When you age, the enamel on your teeth starts to wear off, which commonly results in a yellow look.

    Brown places on teeth can be prominent or hardly visible as well as range from light yellow to dark brownish. Some spots may not be areas in all but irregular or uniform lines. While brownish areas commonly arise from inadequate hygiene as well as pose a visual issue, they might also be symptomatic of various other wellness problems, like gastric condition. The sort of stain that comes from berries and red wines can be exceptionally challenging to manage by yourself. Just consider it – if it got on a white t shirt, you could need to toss the entire point in the trash. Attempt to wash with water each time you drink white wine, to restrict new stains from developing.

    Microorganisms, acid, food as well as saliva mix to create dental plaque. Dental cavity on the external enamel surface does not usually cause discomfort or symptoms. You’re most likely to experience signs and symptoms as decay gets to past the enamel right into the dentin and also pulp. There are countless sort of microorganisms in a human’s mouth. Numerous germs in our mouth are excellent because they aid in regulating germs that is harmful.

    It is a persistent problem that develops a big, shallow sore and gradually gets into first the root’s cementum and after that dentin to trigger a persistent infection of the pulp. Due to the fact that oral pain is a late searching for, lots of sores are not discovered early, resulting in restorative challenges and also boosted tooth loss. A person experiencing decays might not understand the disease. The earliest sign of a new rancid lesion is the look of a milky white area externally of the tooth, suggesting an area of demineralization of enamel. This is described as a white place sore, an incipient rancid sore or a “micro-cavity”. As the lesion continues to demineralize, it can transform brownish however will ultimately become a cavitation (” cavity”).

    They’re excellent at getting rid of all type of imperfections and spots from their roots. Inspect to see if your location has a low-cost oral clinic that offers lightening solutions. However the gel’s lightening agents aren’t as effective in a pen.
    Brush With A Hand-operated Toothbrush And Also Tooth Paste Having Baking Soda
    Today, several dental professionals also use bleaching programs that can be completed entirely from residence. This particular system is exceptional for individuals with sensitive teeth as it is milder and also has just a portion of the lightening representative lots of other systems have. A fringe benefit is being able to utilize whiteners as part of a daytime or nighttime routine. It is very important to be cautious when utilizing products with hydrogen peroxide at home, as they can trigger or increase tooth level of sensitivity. It is critical to use each item as guided as well as to not consume them, as the ingredients are poisonous. There are all-natural treatments for whatever, consisting of teeth lightening.

    Bring your youngster to the dental expert for exams as well as cleaning. Everyday, our mouth undertakes this process of losing as well as changing minerals. Cariesology or cariology is the research study of cavities. Dental caries has existed throughout human background, from very early hominids millions of years back, to modern-day people. The occurrence of decays boosted drastically in the 19th century, as the Industrial Transformation made certain products, such as refined sugar as well as flour, readily available. The diet plan of the “recently industrialized English working class” after that became centered on bread, jam, and sweetened tea, substantially enhancing both sugar usage and also caries.
    Philanthropic Treatment & Economic Support
    When dental caries enters this phase, dental caries are usually present. The treatment that’s suggested for dental caries can depend upon its phase. Let’s take a. take a look at the different treatment choices based on the development of tooth decay.

    Implants and bridges are extremely pricey, so obtaining that cavity filled or developing good dental hygiene behaviors can save you a great deal of money in the long run. Here are some methods to avoid dental caries from taking place in your mouth as well as quit dental cavity from ruining your lovely smile. Every single time we eat or consume something that contains sugar or starches, germs in our mouth use the sugar and starch to produce acids. It isn’t just adults that avoid the dental expert that experience tooth decay. Children are additionally prone to tooth decay as well as are actually more likely than grownups to experience it.
    Dental Practitioner In Downtown Los Angeles
    Fluoride functions to strengthen enamel, making it more resistant to the acids created by plaque germs. As tooth decay establishes, the bacteria as well as acid proceed their march with your teeth, relocating beside the internal tooth material that contains nerves as well as capillary. The pulp becomes puffy and aggravated from the microorganisms.

  10. บาคาร่าออนไลน์

    November 27, 2023 at 2:23 pm

    • ชิพฟรี – ร่วมเล่นเกมทุกวันแล้วรับชิพฟรี!
    • เกม – เล่นเกมประจำวันให้จบเพื่อรับชิพฟรี!บาคาร่าออนไลน์ ในทุกวันนี้เข้าถึงผู้เล่น เว็บพนัน ได้ง่าย เพียงแค่ใช้โทรศัพท์มือถือที่มีอยู่ ก็สามารถ แทงบาคาร่า แทงบอล คาสิโน และเกมอื่นๆ เช่น ยิงปลา , สล็อต , ไฮโล , เสือมังกร ฯลฯ ผ่าน เว็บพนัน ได้แล้ว ไม่ยุ่งยากเหมือนยุคก่อนๆ ที่ต้องเดินทางไปเล่นที่ คาสิโน ต่างประเทศ ทั้งเสียเวลา
    และค่าใช้จ่าย ในการเดินทาง
    อีกทั้ง โคโรน่าไวรัส หรือ โควิด-19 ที่กำลังระบาด ที่จะเป็นอันตรายต่อ นักพนัน ที่ชื่นชอบ บาคาร่า ทุกท่าน ที่อาจจะได้รับเชื่อโรค ทำให้ป่วย และอาจจะเสียชีวิตได้
    จึงทำให้ คาสิโน ทั่วโลกต้องหยุดให้ บริการพนัน แต่ไม่เป็นอุปสรรคสำหรับ เว็บพนัน 77up ที่พร้อมให้บริการอย่างเต็มที่ตลอด 24 ชม.

  11. Skye

    November 28, 2023 at 1:19 am

    material.Design equilibrium. When a PLA filament absorbs wetness, it inflates, raising the danger of extruder jams. Dampness likewise causes PLA to generate prints with bubbles and also spaces externally, therefore ruining your prints .

    ABL has bounds on just how much it can compensate, so offering a practical starting factor will certainly aid the procedure. It must do without saying that everything must be rigidly placed. BLtouch packages come with small springs yet I have actually never utilized them without issue. Look for any kind of loose bolts in the print head and probe placing assembly as a very first step.
    Alter The Construct Plate Springs
    Begin with five levels less, after that try ten to make sure the layers will not divide. Layer shifting is a huge concern with 3D print high quality troubleshooting. While layers separating can provide your last layout a warped, insufficient look, the layers moving change the entire extent of the print. It will appear like you quit your task at a particular factor, relocate around the print bed, and left it in the wrong location for the rest of the task. You can change the height of the nozzle by going into your system setups and setting a countered for the Z-axis. It must be a favorable number to make sure the nozzle is above the print bed.

    If none of the above remedies help you, you can try utilizing a 2.85 mm diameter filament. This is an odd issue that is just noticed near the end of the print. There appear to be openings or spaces in between surrounding layers on the leading surface area. While the rest of the print will be remarkable, the top layer will create the print to fail.
    Layers Not Lining Up Well
    After this, the print head adheres to the Z-axis, lifts and goes back to the starting point to supply the next layer. An additional certain way to prevent ringing is firmware acceleration. Experienced users should know with Velocity and Jerk– these settings let you customize the rate of the head when altering instructions throughout the production.

    To stop wetness in the future, guarantee you’re storing your filament appropriately in an air-tight covered bag with fresh charged desiccant, in an awesome completely dry location. Do not leave filament out for longer than during printing. A lot of slicers automatically enhance the infill 3D printing speed or use a larger extrusion multiplier/line size than normal lays out. This setup is typically proportionally established by using a multiplier to your basic 3D printer setups. If you’re pushing your printer to its limits in rate as well as extrusion volume, the infill is the most likely place where it starts to fall short initially. For that reason, either lower your general extrusion settings, or locate the modifier for the infill as well as minimize that.
    Allow Retractions
    Stringing is an usual issue that people encounter when 3D printing. It’s a print imperfection that generates lines of strings throughout a 3D print. They must produce a fairly low/deep audio when plucked.

    This consists of guidelines for software program setups and also even finest practices for details prints and also materials, where suitable. Feel confident, the problems andsolutions toevery 3D printing problem you can experience are explainedin this suggestions & fixes-packed overview to 3D printing. Issue/TitleThis highlights the action of a printer or print result that is not optimum or proper. By adhering to these tips and advice, you’ll have the ability to detect and deal with some of one of the most usual 3D printing troubles. Just adhere to these techniques to boost your 3D printing bond.

    An irregular platform indicates one component is more detailed to the nozzle than one more, which can reduce attachment. Lots of 3D printers have bed-leveling walkthroughs in their 3D printing software. Others could have a description in the guidelines, or you can find an online tutorial for your make and also model. Before starting a task, check the filament spindle and watch the print head relocation, however don’t see any filament coming onto the print bed. In this case, nothing is publishing due to the fact that the nozzle is too near to the print bed.
    Ensure You Are Printing On A Solid Base
    Reduce the Z-axis movement speed in your slicer settings. Some 3D printing concerns such as this, appear as completely arbitrary and separated occasions. There are some checks that can be done to fix it though so maintain reviewing to read more. You’ll see sharp corners will fracture initially as the anxiety here is greater. Print slower to offer the published line more time to cool before the following layer is put down.

    Luckily, various kinds of 3D printing approaches are a perfect remedy to meet the vibrant needs of this market. Product extrusion is without a doubt the lowest-cost 3D printing method with good precision and also flexibility. That’s why you’ll locate that most domestic 3D printers utilize this type of 3D printing technology as it’s more common as well as less complicated to manage. An additional prominent option amongst the types of 3D printing innovation is the product jetting process. In this situation, the 3D printer uses liquified material droplets to construct each layer. Binder jetting is a straightforward method of 3D printing that relies on a commercial bonding agent to sign up with various layers of a part.
    Why Post-processing Is Needed In 3d Printing
    The company participated in the NASA’s 3D Printed Environment Obstacle in collaboration with the Colorado School of Mines and was awarded a reward for its printed structural system prototype. MX3D Metal founded by Loris Jaarman as well as team has actually created 2 6 axis robot 3D printing systems, the very first uses a thermoplastic which is extruded, notably this system allows the manufacture of freeform non-planar grains. The 2nd is a system that relies upon additive welding the additive welding technology has been created by different teams in the past. MX3D worked with the fabrication and installment of the metal bridge in Amsterdam for 6 years. The bridge has a span of 12 m and a last mass of 4,500 kg of stainless-steel. In 2017, a job to develop a 3D-printed skyscraper in the United Arab Emirates was introduced.

  12. Francine

    November 28, 2023 at 5:08 am

    Nicely put. Appreciate it!

  13. Jeremy

    November 28, 2023 at 10:16 am

    Incredible tons of great data.

Leave a Reply

Your email address will not be published. Required fields are marked *


The biggest-ever win on Aviator for the whole of Africa




Lucky player at betPawa Ghana touches down with the game’s biggest win to date after riding out phone glitch

Aviator, the world’s number one crash game from award-winning developer, SPRIBE, has landed another big winner at popular betting brand betPawa Ghana won a massive $500,000 (ZK11.8 Million) – the biggest Aviator win in Africa.

This is how the action unfolded…

Fuseini, from Kumasi, Ghana, opened betPawa on his smartphone and headed straight to the game lobby to take flight with Aviator. Having set his bets at GH¢20, he launched the plane and watched as it climbed higher and higher, with the bet multiplier also getting bigger and bigger.

With Aviator, the aim of the game is to hold your nerve for as long as possible – the longer you hold out, the bigger the win multiplier gets. Of course, if the player waits too long, the plane flies away taking their accrued winnings and original stake with it.

In a twist of good fortune, his smartphone was not functional, and he couldn’t cash out for a few moments. Those few extra seconds of being airborne took the multiplier sky high, taking his total win to a life-changing ZK 11.8 Million (more than $500,000).

Not only did he hit the Highest Cash Multiplier of the Week, but his win is the largest ever recorded in Ghana since SPRIBE introduced Aviator to the market back in 2018.

To mark the occasion, betPawa treated Fuseini to a once-in-a-lifetime experience, flying the avid football fan and his family and friends to a football match in a private jet. The betting brand, which is active in eleven African countries, then held a press event where Fuseini spoke emotionally about the win and was presented with a cheque for $500,000.

Giorgi Tsutskiridze, CCO at SPRIBE, said: “Aviator is a thrilling game loved by more than 10 million players a month across the world. Not only does it provide engaging, fast-paced action on mobile and desktop, but as seen by Fuseini, it gives a superb opportunity to players to build their wealth and fortune just by playing the best crash game in the world.”

“Aviator is multi-player and social, and Fuseini can now enjoy his time at the top of the Aviator Battle Royale Leaderboard where other players can put their mettle to the test to see if they can land an even bigger multiplayer.

“It’s also great to see betPawa give Fuseini the royal treatment following his big win. This is a great branding opportunity for the operator and also helps to make even more players aware of the Aviator and why it’s the number one crash game on the planet.”

Fuseini said: “I cannot believe what is happening to me because I never imagined ever being on an aeroplane. Today, I have been flown on a very luxurious plane fit for a millionaire.”

Ntoudi Mouyelo, CCO at betPawa, added: “We are so happy for Fuseini and his incredible win on Aviator. What better way to celebrate than putting Fuseini in a real plane and flying him to watch his favourite sport, football. With his winnings in hand, he can now travel in style wherever he goes.

“Aviator really is one of the most popular games in our lobby, and we look forward to sharing more big win stories as they land.”


Continue Reading


Pastor guilty of defilement 



THE Lusaka Magistrate’s Court has found a Presbytery Church pastor guilty of defiling his granddaughter aged 11.

Magistrate Mutinta Mwenya convicted Allan Muchulu yesterday and committed him to the High Court for sentencing.

In this matter Allan Muchulu, of Lusaka’s Meanwood, is charged with defilement of a child.

The defilement of the child took place  in March last year, in Meanwood.

And during trial, the girl narrated before a magistrate that the cleric had sex with her several times and would go to her bedroom in the night when she is not menstruating.

The accused pleaded not guilty and the State called several witnesses to testify against him for allegedly defiling the granddaughter of his brother-in-law.

During trial, the court heard that the victim, who is a double orphan, was being kept by Muchulu and his wife, who is the victim’s grandmother.

The court also heard that owing to alleged politics in Mrs Muchulu’s family, the pastor was allegedly implicated in the crime.

Lusaka resident magistrate Mutinta Mwenya later found Muchulu with a case to answer and placed him on defence.

In defence, Muchulu denied sexually abusing the minor, whom he described as a pathological liar.

The cleric also claimed that his wife’s relatives framed him.

“I stand here very surprised and shocked that I could have committed such a thing. I believe I have been framed because it is very juicy to hear what is happening about a pastor. As far as I know, I did not do what they are alleging I have done,” Muchulu said.

But during cross-examination by public prosecutor Malama Chisenga, Muchulu described the victim as a pathological liar.

“Are you a doctor to confirm that she is a pathological liar?” Ms Chisenga asked, as the accused said “no”.

And in her judgment, magistrate Mwenya said  Muchulu’s defence and accusation of the victim of being a liar was an afterthought.

“I find it an afterthought for the defence to tarnish the image or character of the victim that she is a liar to merely evade the wheels of justice as this could have been raised in cross examination of the prosecution witness,” she said.

The court pronounced the clergyman guilty of the offence because allegations were proved against him.

Magistrate Mwenya further ruled out possibility of false implication and that she believed the testimony of the victim, who struggled to open up as during trial as she looked sad, distressed and disturbed.

(Mwebantu, Tuesday, 28th November, 2023)

Continue Reading


Zambia Correctional Service Officer arrested for alleged murder of a bricklayer who delayed to bring him food, police say



POLICE in Mumbwa have arrested and charged a Correctional Service Officer stationed at Kitumba Correctional Farm in Mumbwa for alleged murder of Richard Silwamba aged 42 a bricklayer at Sugarloaf Enterprise Kaindu in Mumbwa.

Clifford Chota Mubili 29 allegedly beat up the deceased after he delaying from buying his food.

Police spokesperson Rae Hamoonga said the officer will appear in court soon.

“It is alleged that the deceased delayed to come back from buying foodstuffs after having been sent by the suspect, making him annoyed and later got a metal bar and hit the deceased on the face,” he said.

Mr Hamoonga said the body of the deceased was inspected and a deep cut was seen on the upper right eyebrow.

The body has been deposited in Mumbwa District Hospital Mortuary awaiting Postmortem while the suspect is detained in Police custody and will appear in Court soon,” he said.

(Mwebantu, Monday, 27th November, 2023)

Continue Reading

Mwebantu on Facebook

© Copyright © 2023 Mwebantu. All Rights Reserved. Zambia's leading Social news platform.